Innominds Engineering is well-known PTFE Machined Components/Parts manufacturers in Pune, Chakan, Bhosari, Talawade from Maharashtra. We are reputable producer of PTFE machined components and elements that supplies a variety of industrial segments with ISO 9001:2015 certificate and fluoropolymer technology. The company has completed more than 15 years and has been developing expertise in processing PTFE, as well as high performance Custom PTFE Machined Parts such as PTFE Washer, PTFE Ring, Strip, Gasket, and O Ring to provide reliable and customized components to the extreme applications.
We as PTFE Machined Components/Parts manufacturers, suppliers and dealers in Pune. Since we have specialized in quality production of PTFE Lined Bellow, Bush, rods and other essential parts which perform safely in high temperature, hostile chemical and high voltage conditions. We are focused manufacturer and supplier of parts of PTFE machined, according to the customer, that all dimensions, tolerance and surface finish are in line with the requirement of the use. component of the famous PTFE characteristics such as high chemical resistance, nonstick behaviour, and long service life.
Part of polytetrafluoroethylene material that is cut and formed are the machined PTFE Component. This hard plastic is transformed into custom products such as bushes, seals and guides. It is resistant to chemicals and heat. These sections present minimal friction to movement. PTFE Machining Parts are applicable in areas where metals are easily destroyed. Real results, rather than just words bring about trust.
As PTFE Machined Components manufacturers in Pune, we provided different types according to different requirement which are given below.
We've added below a specialized table of PTFE Machined Components/Parts in Pune that provides further technical specification information.
| Property | Virgin PTFE Parts | Glass Filled (15-25%) | Carbon Filled (25%) | Bronze Filled (40%) |
|---|---|---|---|---|
| Machining Tolerance | ± 0.05 mm to 0.1 mm | ± 0.02 mm to 0.05 mm | ± 0.03 mm to 0.05 mm | ± 0.02 mm to 0.04 mm |
| Surface Finish (Ra) | 0.4 to 1.6 μm | 0.8 to 3.2 μm | 0.8 to 2.4 μm | 1.6 to 3.2 μm |
| Tensile Strength | 20 – 35 MPa | 15 – 22 MPa | 13 – 18 MPa | 15 – 20 MPa |
| Hardness (Shore D) | 50 – 60 | 65 – 75 | 65 – 72 | 70 – 80 |
| Compressive Strength | 4 – 5 MPa | 12 – 15 MPa | 12 – 14 MPa | 14 – 17 MPa |
| Service Temp. | -200 to +260°C | -200 to +260°C | -200 to +260°C | -200 to +260°C |
| Deformation (Creep) | High | Low | Low | Very Low |
The principle of operation of PFTE machined parts is based on the fact that the material is naturally slippery, and therefore minimizes wear between moving components. Raw PTFE is molded by heat and pressure to give the material its precise shapes before it is machined to the appropriate specifications. It is resistant to chemicals and is stable under load in use. This is why it is suitable in seals and bearings.
As PTFE Machined Parts suppliers in Pune, according to machine we have different benefits developed which are given below.
As PTFE Machined Parts dealers in Pune, it is applicable in different sites and areas which are given below.
Innominds Engineering is prominent PTFE Machined Components/Parts manufacturers in Pune, suppliers and dealers in Pune, the preferred manufacturer of PTFE machined parts in Pune, offers the best. Take components that outmatch chemicals, heat, and friction daily. Ready for and smooth, smooth and strong, With your machines. We Serve of Pune, good response to needs. Make us your long-lasting custom fits. Spend the time and concern that has been tested. Now raise your working standards using the trusted PTFE solutions. Contact in the present day to get smooth performance.
PTFE has unsurpassed slip and strength to hard stuff. Perfect to work in hard jobs where others fail.
These take years before These wear out in heat and chemicals. Dependable for steady use.
Yes, we make to your close shape and mould. Fast and accurate out of our base in Pune.
